G5050 KOMBI BALER-WRAPPER COMBINATION TECHNICAL DATA // BASIC MODEL Weight 5,400 – 7,700 kg Bale diameter 0.90 – 1.50 m Total length 7,840 mm When bales are loaded through without wrapping process (hay, straw) up to 2.00 m Total width 2,990 mm Oil requirement starting at 60 l/min at 190 bar Total height 2,800 – 3,350 mm Bale weight up to 1,800 kg BASIC MODEL (without round baler) - WITH EU type-approval Load sensing Can also be operated in conjunction with tractors without load sensing pump Twin wrapping arm Hydraulically actuated wrapping table Additional roller for wrapping table 4 bale conveyor belts including belt guide and 4 bale guide rollers Bale deposit backwards Film pre-stretcher 750 mm Film cutter Film monitoring unit Single-film mode Hydraulically lowerable film storage for up to 10 rolls of film Height-adjustable drawbar for high and low hitch Tandem axle chassis with tires 560/45-R22.5 Flotation Trac Dual-line air brake system Attachment parts for round baler AGCO (Fendt & MF) 130F, 160V, 180V Paint option of blue or baler color LED work lights Fully automatic program control ISOBUS (without terminal) 16
ADDITIONAL EQUIPMENT Tires 650/40-R22.5 Vredestein Flotation Trac (extra charge added to standard tires) Width altered to 3,150 mm | without EU type-approval Tires 710/35-R22.5 Nokian Country King (extra charge added to standard tires) Width altered to 3,290 mm | without EU type-approval Film pre-stretcher combined For film widths between 500 mm and 750 mm; the overlap can be adjusted as well Hydraulic articulated drawbar Hydraulic articulated drawbar with two double-acting cylinders Hydraulic articulated drawbar with suspension Hydraulic articulated drawbar affords the operator an exceptionally smooth ride Extra bale rotation When the wrapping process is complete, the bale will keep turning to allow the film to make better contact Bale drop mat: for a gentle bale drop onto the field Bale tipper When the wrapping process is complete, the bale is positioned on its right front side with the direction of travel Drawbar – long version: 200 mm longer than standard drawbar PTO shaft may have to be extended Camera system – Required connection: 12 volt hybrid connector DIN ISO 4165 Terminal ISOBUS S (4.3") with 8 buttons and encoder Terminal ISOBUS L (7.0") with 12 buttons and encoder ISOBUS-capable power supply for tractor Wiring harness is required if ISOBUS is not available on the tractor Drawbar eye types: A, B, C, D, F (for an overview, see page 104) – please specify when placing your order! Baler assembly net At the factory: Baler is provided by the customer (cost of delivering the baler is borne by the customer) At the customer's: Installation requires one person and a 5,000 kg crane (baler will be lifted to a height of approx. 1.5 m during installation) as given in overview COUNTRY-SPECIFIC EQUIPMENT Dual-line hydraulic brake system - with emergency brake valve and accumulator (extra charge added to basic model) Rotating light (height plus 200 mm) Training net REQUIRED CONNECTIONS 1 pressure connection and 1 depressurized return for the supply of the wrapper Load Sensing connection (required for LS mode only) Electrical power supply to the machine via ISOBUS connector or the included wiring harness 7-pin socket for the entire lighting system (except work lights) 17
G1010 PALLET WRAPPER Program contro
BALE TRANSPORT DEVICES TDE - Bale T
BALE TRANSPORT DEVICES BTGHA - Roun
BALE TRANSPORT DEVICES RBG - Round
BALE OPENING DEVICES RBS - Round Ba
BALE OPENING DEVICES Figure 1 - Cat
BALE OPENING DEVICES RADIO REMOTE C
ADDITIONAL EQUIPMENT Swivel device
ADDITIONAL EQUIPMENT Swivel device
ADDITIONAL EQUIPMENT Swivel device
ADDITIONAL EQUIPMENT Swivel device
ADDITIONAL EQUIPMENT Swivel device
ADDITIONAL EQUIPMENT Swivel device
ADDITIONAL EQUIPMENT Swivel device
EXHIBITION STANDS TECHNICAL DATA (s
TIRES Complete wheel 300/80-15.3 10
Dieci/New Holland Dieci Dedalus JCB
Adapter Weiste triangle Cat. O Comm
111
NOTES 113
115
117
119
Laden...
Laden...
Laden...