Aufrufe
vor 6 Jahren

EN | Product Range | Goeweil

  • Text
  • Bale
  • Hydraulic
  • Wrapping
  • Additional
  • Drawbar
  • Width
  • Height
  • Outlet
  • Wrapper
  • Length
Over the last few decades, GÖWEIL have established themselves as a specialist in manufacturing round bale wrappers. As an exceptionally high portion of their products are exported, GÖWEIL machines have become renowned and are widely used throughout the world. All machines and equipment are designed, developed and produced exclusively at the company’s location in Kirchschlag (Upper Austria). All products made by GÖWEIL reflect the state of the art and are designed to fit the individual requirements of your specific applications.

G5020 ROUND BALE WRAPPER

G5020 ROUND BALE WRAPPER TECHNICAL DATA // BASIC MODEL BASIC MODEL - WITH EU type-approval Twin wrapping arm Hydraulically tilting wrapping table 4 bale conveyor belts including belt guide and 4 bale guide rollers Bale pick-up from the front, bale deposit backwards Film pre-stretcher 750 mm Film cutter Storage for 6 rolls of film Hydraulically controlled pivoting drawbar with lower linkage link Tires 380/55-17 AW LED Light and indicator system LED work lights Fully automatic program control PROFI The execution of all work cycles is fully automatic 48 Program control PROFI Weight 1,780 kg *Bale diameter 0.90 – 1.50 m with standard wrapping arm Length 3,940 mm *Bale diameter 0.90 – 1.35 m height altered to 2,785 mm Width 2,750 mm Oil requirement starting at 25 l/min with standard hydraulics at max. 190 bar starting at 65 l/min with LS hydraulics at max. 190 bar Height 3,060 mm Bale weight up to 1,800 kg *Please specify when ordering! REQUIRED CONNECTIONS 1 pressure connection and 1 depressurized return for the supply of the wrapper (not applicable for PTO drive shaft) 3-pin socket for electrical supply with direct supply to the battery (12V/30A) - wire cross section 2x6 mm² 7-pin socket for the entire lighting system (except work lights)

ADDITIONAL EQUIPMENT Tires 480/45-17 AW – width altered to 2,880 mm Radio remote control Required connection: 3-pin socket for electrical supply of the hand-held terminal (12 V / 10 A) Load sensing: Oil pressure and oil quantity are adjusted to consumption. This boosts energy efficiency and speed. The machine can also be operated in conjunction with tractors without load sensing pump. Load sensing connection required Film pre-stretcher combined For film widths between 500 mm and 750 mm; the overlap can be adjusted as well Film monitoring unit with single-film mode: Stops the wrapping process if film tears or runs out. Automatically switches to “single-film mode” as soon as one roll runs out. During this process the feed rate is reduced to ensure an overlap of 50 %. PTO drive shaft (without hydraulic oil) Including gearbox with pump, return filter, hydraulic oil tank and lower linkage link PTO drive shaft Load Sensing (without hydraulic oil) Including gearbox with pump, return filter, hydraulic oil tank and lower linkage link Cardan shaft Extra bale rotation When the wrapping process is complete, the bale will keep turning to allow the film to make better contact Additional roller for wrapping table Prevents the bale from dropping off the wrapping table in steep terrain Bale drop mat (including additional roller): For a gentle bale drop onto the field Bale tipper (including additional roller): When the wrapping process is complete, the bale is positioned on its right front side with the direction of travel Battery supply cable 5.3 meters 2 x 6 mm 2 with 3-pin power socket COUNTRY-SPECIFIC EQUIPMENT Dual-line air brake system without EU type-approval Dual-line hydraulic brake system - with emergency brake valve and accumulator without EU type-approval Hydraulic brake without accumulator and breakaway quick-closing device without EU type-approval Rotating light (height plus 150 mm) Training net 49

GÖWEIL Prospekte / Catalogs

Ihre Sprache / Your Language