Aufrufe
vor 6 Jahren

EN | Baler-Wrapper Combination | LT-Master | Goeweil

  • Text
  • Bale
  • Silage
  • Maize
  • Bales
  • Wrapping
  • Drawbar
  • Feeder
  • Alfalfa
  • Materials
  • Compression
The LT-Master is THE baler-wrapper combination for round bales. This is because it can turn almost any chopped material into perfectly pressed and wrapped round bales – whether it be maize, CCM, alfalfa, sugar beet cossettes, and grain, or even garbage, wood chips, mixed feed, etc. The idea behind the development of the LT-Master was to both make silage maize easier to handle by pressing it into convenient round bales and make it useful also for smaller agricultural operations. Each bale forms a small unit that can be fed to the animals in a quick and simple fashion. Bales of silage maize are an excellent choice as they keep the quality of the feed exceptionally high by protecting it against secondary fermentation or post-heating after the feed was pressed into bales.

LT-MASTER ADDITIONAL EQUIPMENT Its versatility is one of the key advantages of the baler-wrapper combination. This is why GÖWEIL offers a large selection of additional equipment that can be paired with it. This makes it possible to tailor the machine to the specific needs of the customer. ADDITIONAL EQUIPMENT Electric drive Consists of a 90 kW (120 hp) electric motor with soft starter. Complete with switch cabinet, wiring, base with forklift slings, emergency switch and main switch Required connection for electric motor: 400 V / 50 Hz, CEE 125 A, protection class IP55 Weighing system, non-calibrated Consists of weighing table, display and label printer Weighing system, calibrated Consists of weighing table, display and label printer Bale delivery ramp with bale tipper The bale can be set down gently on the face side (left or right), or forward Silage additive dosing unit LSP junior NK (acid-resistant), pump with filter, electronic flow meter Dosistar VD 390, 2 nozzles 0.1 in stainless steel design plus suction hose for extraction from tank. Attention! Tank not included Silage additive tank 450 liter stainless steel tank mounted on the machine Drawbar eye types: A, B, C, D, E, G Weighing system with four integrated load cells – available as calibrated and non-calibrated versions COUNTRY-SPECIFIC EQUIPMENT Rotating light Typification DETAIL OF ADDITIONAL EQUIPMENT OPTIONS Weighing system The four load cells are integrated directly into the wrapping table. The display is installed into the switch panel. The weighing process of the bales is automatic, thereby preventing any delays in the work flow. The bales can be weighed individually or evaluated as a complete batch. Setting the different options using the terminal is exceptionally easy. The label printer can be used to print such information as the weight of the bale, the date, the time as well as a recorded logo. If labels are not required, this function can be switched off at the terminal. Adhesive labels and the writing tape are commercially available goods and can be purchased at specialized dealers. It is possible to retrofit existing machines with the weighing system. Display in the switch panel Label printer (top) and adhesive label on the round bale (bottom) 18

1 IMAGE DESCRIPTION 1) Bale delivery ramp with bale tipper left: bale tipper enabled right: standard controlled bale deposit with bale tipper disabled 2) Electric drive with switch cabinet and cardan shaft 3) Drawbar eye types for LT-Master Bale delivery ramp with bale tipper Integrated into the bale delivery ramp, the bale tipper makes it possible to drop the bale gently either to the left or the right. If the tipper is deactivated, the bale will, by default, be unrolled towards the front. Since stored on the face side, the bales can be removed in a faster and more gentle way. 2 Electric drive Powered by a cardan shaft, the drive can also be used with a tractor at any time. The motor generates very little noise during operation and keeps the cost of operation very low in order to steer clear of the high prices of fuel. The electric drive not only saves space but produces no exhaust gases, also making it a good solution for operation in halls. Nonetheless, its cover makes the electric drive also suitable for outdoor use (temperature range: – 15 to + 60 °C). Maintenance costs are very low, and the electric drive is easy to transport thanks to the base with forklift slings. The electric drive is equipped with a soft starter. This feature significantly reduces initial voltage peaks and the starting torque. This helps save power and puts less strain on drive, shafts, and gearbox. Power: 90 kW (120 hp) Voltage: 400 V Frequency: 50 Hz Protection class: IP 55 Power input: max. 125 A Drive: 740 rpm Weight: 2,970 kg (6,550 lbs) L x W x H: 1,773 x 1,323 x 1,652 mm (70 x 52 x 65 in) CEE 125A 3 A K80 drawbar eye B Standard drawbar eye D40 mm C Ring drawbar eye D50 mm Drawbar eye types A K80 drawbar eye Ball coupling B Standard drawbar eye D40 mm acc. to DIN 11026, ISO 5692-2 C Ring drawbar eye D50 mm rotatable (hitch ring) / DIN similar to 9678, ISO similar to 5692-1 D Ring drawbar eye E Standard drawbar eye G Standard drawbar eye D Ring drawbar eye D50 mm rigid (hitch ring) / DIN similar to 9678, ISO similar to 20019 E Standard drawbar eye D50 mm Truck drawbar eye / DIN similar to 74053, ISO similar to 1102 G Standard drawbar eye D40 mm Truck drawbar eye / 30 mm thick / DIN similar to 74054, ISO similar to 8755 D50 mm D50 mm D40 mm 19

GÖWEIL Prospekte / Catalogs

Ihre Sprache / Your Language