Over the last few decades, GÖWEIL have established themselves as
a specialist in manufacturing round bale wrappers. As an exceptionally
high portion of their products are exported, GÖWEIL machines have
become renowned and are widely used throughout the world. All machines
and equipment are designed, developed and produced exclusively
at the company’s location in Kirchschlag (Upper Austria).
All products made by GÖWEIL reflect the state of the art and are
designed to fit the individual requirements of your specific applications.
G1015 ROUND BALE WRAPPER
G1015 ROUND BALE WRAPPER TECHNICAL DATA // BASIC MODEL Weight Length Width Height Roller opening width Bale diameter Oil requirement Bale weight 985 kg 2,220 mm 1,800 mm 2,355 mm 1,750 mm 0.90 – 1.60 m starting at 20 l/min at max. 190 bar up to 1,200 kg Program control STANDARD 1750 mm BASIC MODEL Load sensing Can also be operated in conjunction with tractors without load sensing pump Single wrapping arm Cat. II and Cat. III three-point linkage Hydraulically swiveling roller arms for picking up and depositing the bales 2 bale guide rollers Film pre-stretcher 750 mm Film cutter Storage for 1 roll of film LED work lights Program control STANDARD with radio remote control Bale pick-up and deposit are controlled using the electronic joystick. The cycles “wrapping process” and “film cutting” start automatically. 34
ADDITIONAL EQUIPMENT Film pre-stretcher combined For film widths between 500 mm and 750 mm; the overlap can be adjusted as well Film monitoring unit Stops the wrapping process if film tears or runs out Connections for hydraulic upper linkage The hydraulic upper linkage is controlled directly using the program control of the wrapper Support roller Length changes to: 2,370 mm / height changes to: 2,505 mm Bale tipper Operation via program control Counterweight Approx. 60 kg Battery supply cable 5.3 meters 2 x 6 mm² with 3-pin power socket LED Light and indicator system PTO drive shaft (without hydraulic oil) Including gearbox with hydraulic pump, slip-on tractor PTO drive shaft, return filter and 30l hydraulic oil tank Possible attachments (without installation): Euro-attachment Merlo, Merlo ZM3, SMS, MX Dieci/New Holland, Dieci Dedalus, Manitou, JCB Q-Fit, JCB Compact Tool Carrier, Weidemann hydraulic, Kramer, Schäffer up to 3550, Schäffer from 3550T, Atlas, Claas Scorpion, Zettelmeyer 402, Zettelmeyer 602, CAT 907H / Liebherr L507, Faresin, Faucheux, Bobcat, CAT TH 407 C, Giant, Skid Steer, Fendt Cargo T955/Sennebogen Other attachments - Overview of attachments with dimensions - see page 106 COUNTRY-SPECIFIC EQUIPMENT Training net REQUIRED CONNECTIONS 1 pressure connection and one depressurized return for the supply of the wrapper Load Sensing connection (required for LS mode only) 3-pin socket for electrical supply with direct supply to the battery (12V/30A) - wire cross section 2x6 mm² 35
