Aufrufe
vor 4 Jahren

EN | Round bale wrappers | G30 Series | Goeweil

  • Text
  • Bale
  • Wrapping
  • Hydraulic
  • Profi
  • Cycles
  • Stretching
  • Exclusiv
  • Farmer
  • Additional
  • Wrapper
  • Goeweil
Premium grass silage requires superior feed preservation. The round bale wrappers of the G30 series satisfy these requirements to the fullest. Bales are packaged into convenient feed units in a fast, clean and, first and foremost, perfectly air-tight manner.

SERIES

SERIES G30 HIGHLIGHTS 1 DESIGN 3 ROTATING WRAPPING ARM WITH STATIONARY WRAPPING TABLE The Series G30 wrappers are particularly characterized by their low working height. The robust and solid design and workmanship of the wrapper guarantee a long service life. It is impossible for the bale to fall off with this system as there are no centrifugal forces acting on it. While the belts ensure continuous rotation of the bale, the two rotating bale guide rollers (optionally up to four) keep the bale in position. This guarantees uniform overlapping of the film. When bale deposit is performed, the wrapping table is tilted to the side and the bale is gently deposited next to the machine. 5 CONTROL UNIT WITH HAND LEVER The control unit and the hand lever are helpful for maintenance and service work. All functions and processes can be performed directly on the machine. This means that the operator can simply leave the handset in the tractor cab. 5 6 2 WRAPPING ARM WITH FILM STRETCH UNIT The wrapping arm comes with a film stretching unit for 750 mm film rolls. The patented plastic rollers ensure uniform pre-stretching. This saves film and guarantees tightly wrapped and airtight bales. In addition, the rollers are not temperature sensitive. The quick-change system allows empty rolls to be replaced quickly and easily. 4 FILM CUTTER The stainless steel cutting knife guarantees clean and precise cutting of the film. At the same time, the film is fixed by the cutting lever. Shortly after the start of the wrapping process, the standard float position ensures easy release of the wrapping film. 2 4 6

Three-point machine Powered by a towing vehicle G3010 6 7 DRIVE TYPES 8 BALE PICK-UP In the basic model, the wrapper is powered by the towing vehicle. On request, the G3010 wrapper can be equipped with an external drive motor. A choice of PTO or electric drive (4 kW motor) (Fig. 6) or gasoline engine (8.2 kW) (Fig. 7) with battery, e-starter as well as hydraulic system. The G3010 wrapper can be optionally equipped with a hydraulic bale pickup. By turning the lift fork it is possible to lift the bale moving forward or backward. 6 7 8 Trailed machine Self-drive via engine G3010 Farmer & G3010 Profi 9 DRAWBAR & AXLE 10 FILM MAGAZINE The hydraulically adjustable lift axle and articulated drawbar allow the G3010 Farmer and Profi machines to be pulled and parked in work position. The wrappers can be easily loaded with a transport fork due to their low height. A front loader is not required. It is extremely important to have enough film on long workdays. With the G3010 Farmer, up to four rolls of film can be transported, and up to 16 with the G3010 Profi. The holders are located on the rear side of the wrapper at a comfortable working height. 9 10 7

GÖWEIL Prospekte / Catalogs

Ihre Sprache / Your Language