G-1F125 & G-1F125 Kombi FEEDING SYSTEM Short and precisely cut feed is the basis for the production of high-quality and high-energy silage. The material in the GÖWEIL baler flows through its own special passageway – the rotor! This feeding system guarantees optimum feed pick-up under all sorts of harvest conditions. Drop floor & cutting unit Starter roller ONE ROTOR FOR ALL HARVEST CONDITIONS Fitted at the heart of the feeding system is a 6-star rotor that offers enormous absorption capacity. Thanks to its large diameter of 570 mm and the welded-on rows of HARDOX tines, the rotor will always cut the swaths of feed cleanly and convey them reliably into the bale chamber – whether they are large and dry or contain feed that is short and still wet. Installed in front of the rotor is a mechanically powered infeed roller. Precompressing the material with outstanding efficiency, the roller increases the throughput significantly. The newly developed starter roller housed in the bale chamber provides for optimum bale rotation and a reliable start. 8 Infeed roller Material flow via the rotor 6-star rotor PERFECT FLOW OF MATERIAL The rotational direction of the rotor built into the G-1F125 is upward. This movement channels the material from the rotor through the cutting unit and into the bale chamber. DROP FLOOR & CUTTING UNIT As the cutting unit is positioned above the rotor, changing the blades is a breeze and can be accomplished without any tools. This offers an advantage that is particularly beneficial in baler-wrapper combinations. The cutting unit is fitted with 30 twin-blade cutting edges and makes it possible to achieve a cutting length of 35 mm. The narrow spacing between rotor tine and knife ensures that the feed is chopped with pristine accuracy. The replacement knife bar allows the operator to carry along 30 replacement knives or change the number of cutting knives as needed. A hydraulic bar safety device protects the knives against foreign objects and moves them immediately into their cutting Twin-blade reversible knives position.
1 2 3 Clogging of the rotor IMAGE DESCRIPTION 1) Fully automatic clog removal 2) Clogging of the rotor 3) Removal of the rotor clog 4) Clogging of the pickup 5) Removal of the pickup clog AUTO FLOW CONTROL (AFC) The AFC (Auto Flow Control) monitors the entire flow of material and intervenes in fully automatic fashion as soon as detecting a problem in the conveying duct. This ensures that clogs at the rotor or pickup are removed fast and without effort! Here is how it works: UNCLOGGING THE ROTOR The rotor’s overload safeguard trips whenever the conveying duct for the quantity of feed to be delivered becomes too narrow. The hydraulic top floor opens towards the top, and the knives flip back. When the rotor starts up again, the excess material is guided unobstructed into the bale chamber. The drop floor and the knives subsequently return to their original positions, allowing the feed pick-up to resume without hindrance. UNCLOGGING THE PICKUP An overload safeguard will also be tripped if too much feed has accumulated at the pickup. Normally powered mechanically, the infeed roller will then be briefly driven and supported hydraulically to allow it to keep conveying the material. Concurrently with the infeed roller the drop floor swivels up, allowing the material to find its way directly into the bale chamber. Simple, convenient and fully automatic! 4 5 Unclogging the pickup Infeed roller provides assistance Split drive with overload safeguard 9