Aufrufe
vor 4 Jahren

EN | VARIO-Master V140 | Baler-Wrapper Combination | Goeweil

  • Text
  • Grainbaler
  • Ccmbaler
  • Alfalfabaler
  • Maizebaler
  • Hempbaler
  • Silagebaler
  • Cornsilagebaler
  • Variableroundbaler
  • Variablebalechamber
  • Roundbales
  • Roundbaler
  • Baler
  • Balerwrapper
  • Balerwrappercombination
  • Feeder
  • Compression
  • Bales
  • Wrapping
  • Silage
  • Bale
The VARIO-Master is capable of turning a large number of materials including maize, CCM, alfalfa, sugar beet pulp, grain, mixed feed, hemp into perfectly shaped round bales. The variable bale chamber makes it possible to produce highly compacted bales with a diameter of 80 - 140 cm. The seamless work flow provides for maximum compression and quick exclusion of air.

VARIO-Master V140 THE HIGHLIGHTS BALER ELEVATOR WRAPPER 3 2 1 1 FEEDING SYSTEM / DOSING 10 Low-profile design: The low profile design and 3.50 (11’ 6”) meter width of the feeder make the filling process quick and easy – whether you use a dump trailer, push-off trailer, truck, or direct feeding. Large-capacity Multicrop feeder: The Multicrop feeder provides a large buffer with a volume of around 13 m³ (17 yd³). This large capacity keeps the VARIO-Master V140 running during feeding. In order to better process the many different materials, the feeder has been equipped with a dosing drum. This and the feed screws ensure the even flow of materials on the elevator and also optimally process fibrous material such as grass and alfalfa. Scraper floor: The speed of the scraper floor adapts to the quantity of material and is automatically self-regulating. The galvanized, die-forged scraper floor chains from Rübig used on the elevator and feeder are indestructible. CONTROL SYSTEM Program control PROFI with PROFI plus L terminal The VARIO-Master V140 is operated with the PROFI plus L terminal. The user interface is structured intuitively and enables easy operation of the machine. The entire work process as well as the machine settings are depicted via the display. Via the terminal's USB port, the language and customer logos for the weighing system with label printer can be imported with ease and customer account data exported in CSV format.

2 BALER 3 WRAPPER FEEDER Hydraulically powered variable bale chamber: Two bale chamber belts permanently ensure high compression of the material. Bale diameter and bale density are set on the terminal. The round bales can be pressed with a diameter from 80 to 140 cm (32“ - 55“), adjustable in 5 cm (2“) steps. The hydraulic drive allows the speed of the bale chamber to be adjusted to the baled material in four stages. High bale density: The 4 mm thick steel rolls are reinforced on the inside; the ribbing ensures optimal bale density and secure rotation of the bale. Long service life: Large, sealed bearings and a perfectly adapted lubrication system guarantee a long machine service life. Net or film: An efficient binding system is needed to keep a bale in perfect condition. The VARIO-Master V140 is equipped as standard with a combined dual binding unit for net and film. Refeed belt: The refeed belt running underneath the entire length of the machine prevents loss of material; stray material that escapes during the baling process is caught and fed back to the elevator without getting dirty. Mobile wrapping table: The wrapping table slides under the bale chamber and picks up the bales directly, quickly and gently. Twin wrapping arm: The wrapper always stays one step ahead thanks to its standard twin wrapping arm including 2 x 750 (2 x 30”) mm film pre-stretchers. The patented plastic rollers mean more bales per roll of film. Film monitoring and single-film mode: If a roll of film runs out or the film tears, the feed rate of the wrapping table is reduced until a 50% overlap is guaranteed once more. This allows bale wrapping to be completed without interruption. If both film rolls run out or tear, the film monitoring stops the wrapping process. Bale delivery ramp: The hydraulically lowerable bale delivery ramp ensures a gentle bale deposit. Film cutter: The stainless steel cutting knife guarantees precise cutting of the film. The standard float position of the film cutter ensures easy release of the film, which means that no remnants are trapped. Water injection unit: Adds water to dry materials during baling. 11

GÖWEIL Prospekte / Catalogs

Ihre Sprache / Your Language